Place an Order? Toll Free: 1-800-511-3343
Shopping Cart -
0 item(s)
Search by
Hello Guest, Login

Acoustic Research 10" Foam Speaker Repair Kit FSK-10A (PAIR)

Part Number:AR-FSK-10A
Acoustic Research 10" Foam Speaker Repair Kit FSK-10A (PAIR)
AR Speaker Repair Kit # FSK-10A
Acoustic Research 10" Foam Speaker Repair Kit FSK-10A (PAIR)
Your Price:$24.95


In Stock: 159

10" Acoustic Research Speaker Foam Repair New-Edge-It ® Kit, Part # FSK-10A

AR Speaker Foam Edge Repair Kit
Outer diameter:
9-3/4" (248mm)
Roll outer diameter:
8-15/16" (227mm)
Cone diameter:
7-5/8" (194mm)
Inner diameter:
7" (178mm)
Foam roll width:
5/8" (16mm)
Variances up to 1/8" (3mm) from your speaker measurements are OK.
  • 10" angle attach woofer foam repair kit. New-Edge-It ® part # FSK-10A
  • Original Acoustic Research design
  • Fits all 10" frame models with 7-5/8" cone

Please check the model and size of your speakers before ordering to be sure you receive the correct foam edge repair kit.

  • Speaker New-Edge-It ® foam repair kits include:
  • Two new formula polyether foam rubber surrounds. These last much longer than the original foam.
  • Special CLEAR speaker repair adhesive part # MI-3035. The same adhesive we use for our repairs.
  • We do NOT use generic glue or Elmers type white glue like others sell.
  • Easy to follow illustrated instructions. Installation average time is 30 minutes per speaker.
  • You do not need to remove the dust caps to install these kits perfectly - every time.
  • See online installation instructions here: Speaker Refoam Instructions
  • FREE technical support. FREE shipping to any USA address.
  • Join over 150,000 customers that have used our New-Edge-It ® speaker foam repair kits successfully!
5 Stars
Acoustic Research 10" foam repair kit
Used this kit to refoam a pair of original 1970 AR 2ax 10" woofers. The surrounds fit perfectly and instructions were clear and concise. Shipping was quick and free to boot! I'll be using simply speakers for all my refoaming projects from from here on out!
Did you find this helpful?  3 of 3 Found Helpful
Reviewed by:  from HONOLULU . on 11/1/2016
5 Stars
First time refoaming
I had never reformed speaker before, but this kit and the provided instructions and video made it easy.
Did you find this helpful?  2 of 2 Found Helpful
Reviewed by:  from Maine. on 4/12/2017
5 Stars
I replaced both the 10" and 4" foam in my AR48'speakers and while I wouldn't exactly say it was "easy" I would say that it made my old speakers sound like brand new. I called around locally to find out if the job could be done for a reasonable charge and got three quotes. The low-end estimate, and I emphasize "estimate", was $300.00. I re-foamed 4 speakers in about 4 hours, (that includes waiting/drying time) for about $50.00! Best advice I can give - don't panic! The gluing process takes some patience and when the glue starts to stick to your fingers and tools you might freak out a little. I know I did. But just keep working the new foam into place with the old cone and eventually it begins to stick. The main thing is my 80's AR48s sound like a million bucks. I could go on...
Did you find this helpful?  2 of 2 Found Helpful
Reviewed by:  from Boise, Idaho. on 6/15/2014
4 Stars
AR-5 Replacement Foam
I purchased the FSK-10A Acoustic Research 10" Foam Speaker Repair Kit for my AR-5A speakers and am very pleased with the results. The viscosity and drying time for the adhesive is appropriate for the application and the foam itself appears to be superior to the original. I would like to make a couple of suggestions however. There are no cut-outs in the foam for the 4 screws that hold the speaker to the enclosure so the foam has to be notched at those locations. I assume this would be true of most speakers, you may wish to provide notches at the correct locations in the foam or instructions to do this with a 1/4" hole punch. I would not recommend cutting a notch with scissors It would have been difficult to attach the foam to the top of the speaker cone due to the angle, the foam sticks straight out and the adhesive does not become tacky for several minutes so I attached it to the underside of the cone edge which the instructions indicated would not affect the performance. That underside edge does have to be cleaned thoroughly to remove the old foam however and I found that a baby wipe dipped in alcohol worked nicely but be careful not to wet the cone material completely. It would have been better if the foam were formed with an angle for attachment to the cone and the speaker frame so that it would lay flat on both surfaces. Not sure if that possible to do in the manufacturing process. Also, it would be helpful to have a new top gasket for the speaker included in the kit as the old ones can be damaged when removing them. I turned mine upside down to insure a clean smooth surface against the new supplied foam. This too would need to be notched for the speaker mounting screws. The foam material is tough and not easy to rip so it should last longer than the original.
Did you find this helpful?  1 of 1 Found Helpful
Reviewed by:  from Standish. on 12/7/2018
5 Stars
Easy to install. Just take your time. My AR2ax speakers sound great again. Folks at Simply Speakers were very helpful when I messed up one foam ring. I would definitely recommend Simply Speakers.
Did you find this helpful? 
Reviewed by:  from Delaware. on 2/18/2019
5 Stars
music lover
This kit was exactly what I needed to resuscitate the woofers in my vintage AR5 speakers. The process was straight forward as were the instructions. This is a great resource.
Did you find this helpful? 
Reviewed by:  from Pinehurst, NC. on 5/2/2019
5 Stars
worked as advertised. followed the instructions provided no problems at all. used 1/2 " chisel and exacto knife to remove old foam and adhesive. plenty of new adhesive provided in kit.
Did you find this helpful? 
Reviewed by:  from Colorado. on 11/26/2016
5 Stars
Sofa King
Top notch product and service ! I was notified before the foams were to be shipped as to verify my order; I'm glad they did. They picked up that I had ordered the wrong part and they set things right. The proper kit was promptly sent, the speaker refoaming was a piece of cake. My 30 year + AR's sound like brand new. Great folks to deal with !
Did you find this helpful? 
Reviewed by:  from Oro Valley. on 1/19/2017
5 Stars
These are great! Obviously, the more you do, the better they come out. It would be helpful to include in the literature how much time you have to work with the glue before it sets and what to do when the speaker gasket is used on the back side of the speaker, as they are on the AR-90s. Even the first one came out really nice. So nice, I could take this on as a job! Thank you, thank you, thank you!
Did you find this helpful? 
Reviewed by:  from Virginia. on 3/20/2017
5 Stars
10" foam speaker repair kit
The repair kit was perfect for the woofers of my AR 14 loudspeakers. I centered them using the 50 Herz tone generator. They sound great.
Did you find this helpful? 
Reviewed by:  from Clermont Ferrand. on 7/25/2017



Related Items

Ivory Speaker Grill Cloth 60
Average Rating(12)
In Stock:
Jet Black Speaker Grill Cloth 60
Average Rating(162)
In Stock:
Average Rating(5)
In Stock:

Recently Viewed Items

  • Dealer Parts
  • Speaker Repair Videos
  • SS Apparel
  • Diaphragms & Parts
  • New-Edge-It Foam Kits
  • Pro Cloth Edge Kits
  • Rubber Edge Kits
  • Ferro Fluid Kits
  • Speaker Repair Parts
  • Advent - AR - NHT Parts
  • Genuine Eminence Parts
  • JBL Factory Parts
  • ESS Factory Parts
  • EV Factory Parts
  • Peavey Factory Parts
  • Replacement Speakers
  • Tweeters
  • Midranges
  • Woofers
  • Full Range
  • Speaker Grill Cloth
  • Speaker Grills
  • SS Audio Recone Kits
  • Speaker Adhesives
  • Speaker Dust Caps
  • Speaker Gaskets
  • Online Instructions
  • Speaker Accessories
  • Crossovers
  • Specials
  • Scratch and Dent - Open Box
  • Customer Photos & Videos*
  • Speaker Repair Photos
  • Special Order Parts
  • JBL Style Foil Speaker Badges
  • Top Sellers
    New Releases