5.5" Replacement Cone Midrange M-510

5.75" Midrange, Cerwin Vega Style CM6, CM6H, M-510 - Discontinued

17 Review(s)

Write a Review

Your Price: $30.00

List Price:$35.29

You Save:$5.29(15%)

5.75" Midrange, Cerwin Vega Style CM6, CM6H, M-510

Questions about this item? Ask here.

Chat With Us

Part Number: M-510

Availability: 0 Discontinued

Details
Customer Reviews
Q & A
Fits Models
Install

5.75" Replacement Speaker Midrange Part # M-510

Steel Frame, Sealed Back Design, Steel Mesh Screen Front
Paper Cone, Treated Edge
Size: 5.75"
Hole cut-out: 4.5"
Depth: 2"
Voice Coil: 1" Ferro Fluid Cooled
Magnet: 10 oz
Impedance: 8 ohms, Re: 7.2 ohms
Power: 40 watts RMS, 60 watts max
Response: 500-7000 Hz
Sensitivity: 91 dB, 1 watt, 1 meter

Rating Snapshot

Select a row below to filter reviews.

Average Customer Ratings

4.7

View All Reviews - Reset

Reviews Sorting

Excellent

I ordered two of these midrange drivers for my vintage hed u-351 cerwin vega speakers. They were shipped to me in 3 days.Installation required a few new holes but they fit the original cut out perfectly. After listening to the Vegas with the new midrange drivers for a few days . I can definitely hear an improvement in vocals and imaging, they say that the magic is in the midrange and these new drivers give that. Thank you Simply Speakers for your excellent product and service.

Did you find this helpful? 11 of 11 Found Helpful

Reviewed by: Tim from Ontario on 2/24/2016

Reborn D9's

I bought these midrange spaeakers for my Cerwin Vega D9's and after listening to them it's easy to hear the improvement's. Brighter high's clearer vocals, and better imaging well worth replacing to bring new life to old giant's thank you SS for all the wonderful parts!

Did you find this helpful? 10 of 10 Found Helpful

Reviewed by: julie from Reseda on 8/8/2018

AR-3A Midrange alternative

Because I replaced both massive crossovers with a newer 3-ways with L pads, they were no longer true ARs. These Cerwin Vega style midranges worked fine after modifications. The metal is thin, so I made heavy gaskets so the baffle board screws would not cause metal deformation. I had to enlarge the 4 mounting holes to accommodate the AR screws as well. I also added additional foam gaskets to maintain an airtight enclosure. They now sound as good as the original midranges, but look more attractive than those clunky monsters I removed. Plus they were far less expensive than the OEMs.

Did you find this helpful? 3 of 3 Found Helpful

Reviewed by: Nick from VIRGINIA BEACH on 7/6/2020

Plenty of mid

Installed this one in an old Hitachi cab with 10" woofer (fine), but replaced a small 3" mid. Also, replaced the 1" tweeter with the Cerwin-Vega style horn tweeter. Did the same for other speaker cab. Now, I got plenty of highs - so much, that I need to turn down the treble and midrange on my receiver. But, that's what tone controls are for

Did you find this helpful? 3 of 3 Found Helpful

Reviewed by: (Verified Buyer) Terry Kempler from White Marsh, MD on 4/6/2016

Home owner.

Speakers work fine in my system. Originals are marked "CM6" but replacements are 5-3/4" diameter - not 6" like the originals. Fortunately nothing a few judiciously drilled holes into the cabinets could not solve! Back in business and smiling! Items arrived within a few days of ordering and well packaged. Thank-you. I will be recommending you folks in future.

Did you find this helpful? 2 of 2 Found Helpful

Reviewed by: Mark from Windsor Ontario on 3/21/2018

Great Sounding Mids

I bought these mids to replace the ones in my 40 year old Cerwin Vega U321s. As an audiophile I was concerned that these speakers would change the way my CV's sound, and they did - for the better. Now the speakers sound crisp and present in the mids without being harsh. I recommend theses speakers for your Cerwin Vegas

Did you find this helpful? 2 of 2 Found Helpful

Reviewed by: Donald from Austin on 10/21/2019

Speaker

Needed a replacement for an old Pioneer midrange speaker. Had to jigsaw the box a little but how hard is that to do. Sounds great and I didn't have to buy a new pair of speakers. Thanks!

Did you find this helpful? 1 of 1 Found Helpful

Reviewed by: Kevin from Tennessee on 3/21/2014

Sounds like $1000

Replaced all speakers in cheap monitors I bought. Now sounds like $1000 top of line. Thanks.

Did you find this helpful? 1 of 1 Found Helpful

Reviewed by: Jay from US on 10/27/2015

Cerwin Vega replacement

perfect fit midrange for a Cerwin Vega E-715 The impedance is not the same as original it should be 4 ohm. did the job for what i needed. appreciate the fast shipping!

Did you find this helpful?

Reviewed by: Steve from Goodyear, AZ on 5/12/2012

Owner

I received the Cerwin Vega midrange speakers Very quickly and in good shape. They were the perfect replacement fit for my speakers and sound great. Thanks

Did you find this helpful?

Reviewed by: Ken Kruhmin from 4279 Lynn Rd.,Ravenna, Oh. 44266 on 11/18/2014

Q: Are they same as at/10s at/12s and at/15s? The midrange speaker m-5?

Asked by: Lynn - 11/6/2016

A: No. Our replacement midrange part # M-65-8 is a closer match to the Cerwin Vega M5 unit. Check it out on the website!

Was this answer helpful? 5 of 6 Customer(s) found this Answer helpful.

Answer provided by: Simply Speakers (11/7/2016)

Q: What is the distance between mounting holes?

Asked by: Craig - 6/11/2017

A: The diameter center to center across the center of the speaker is 5.31"

Was this answer helpful? 5 of 6 Customer(s) found this Answer helpful.

Answer provided by: Simply Speakers (6/12/2017)

Q: will this fit my dx9 ?

Asked by: jeff hackett - 6/8/2018

A: Sorry, this unit does not fit your model. Please use part # W-206-8 as the replacement for the DX9 midrange.

Was this answer helpful? 4 of 4 Customer(s) found this Answer helpful.

Answer provided by: Simply Speakers (6/10/2018)

Q: I would like to upgrade the midrange speakers in my Cerwin Vega D-9. The cut out is 5". Do you think this speaker would do it?

Asked by: Cosmic - 9/28/2017

A: Thank you. Yes, you can use the M-510 in the Cerwin Vega D-9. The unit has a similar design to the original, but technically not an upgrade.

Was this answer helpful? 3 of 3 Customer(s) found this Answer helpful.

Answer provided by: Simply Speakers (9/29/2017)

Q: Will these fit as replacements for the original mid speakers in the Cerwin Vega VS-150's?

Asked by: Lukas - 6/7/2019

A: Sorry, these units do not fit your model. We use the W-206-8 as a midrange replacement for the VS-150. Thanks!

Was this answer helpful? 0 of 0 Customer(s) found this Answer helpful.

Answer provided by: Simply Speakers (6/7/2019)

Questions about this item? Ask here.

UPC: 700621986256

5.75" Midrange, Cerwin Vega Style CM6, CM6H, M-510 - Discontinued

Rating Snapshot

Average Customer Ratings

Q: Are they same as at/10s at/12s and at/15s? The midrange speaker m-5?

Q: What is the distance between mounting holes?

Q: will this fit my dx9 ?

Q: I would like to upgrade the midrange speakers in my Cerwin Vega D-9. The cut out is 5". Do you think this speaker would do it?

Q: Will these fit as replacements for the original mid speakers in the Cerwin Vega VS-150's?

Recently Viewed

Newsletter

About Us

Shipping

Customer Service

Portfolio

5.75" Midrange, Cerwin Vega Style CM6, CM6H, M-510 - Discontinued

Rating Snapshot

Average Customer Ratings

Q: Are they same as at/10s at/12s and at/15s? The midrange speaker m-5?

Q: What is the distance between mounting holes?

Q: will this fit my dx9 ?

Q: I would like to upgrade the midrange speakers in my Cerwin Vega D-9. The cut out is 5". Do you think this speaker would do it?

Q: Will these fit as replacements for the original mid speakers in the Cerwin Vega VS-150's?

Recently Viewed

Newsletter

Follow us