Q: What are centre to centre screw hole dimensions, crossways and diagonally?
A: Crossways: 1.875" Diagonally: 2.625"
Q: Do I get 1 or 2 tweeters for $12.95?
A: Price is for each unit.
Q: What are the specs of this spkr.power handling and frequency range? Thx Jr.
A: Specs are listed on product page as follows:
Speaker Cone Tweeter Part # T-125
Size: 2-3/8" (3" diagonally)
Hole cut-out: 2"
Magnet: 3 oz
Impedance: 8 ohms, Re: 7 ohms
Power: 10 watts
Response: 3.5 kHz - 20 kHz
Sensitivity: 91 dB
Q: I have a Crate Taxi TX15 battery powered amplifier with a physically broken 2" Piezo tweeter. It is now out of production, so I cannot be too "picky".
I am looking for a simple replacement that will work without damaging anything. I am not "picky" about the new sound quality, but would like to find a "band-aid" approach.
Do you think I could use the Simply Speakers 2" Cone Tweeter T-125"?
Any other ideas?
A: We recommend our 2.5" Piezo horn part # T-1011GR. The T-125 requires a crossover design that is different from the type used for Piezo tweeters.
Q: I need a speaker for a sound bar u measured it from rubber to rubber ...2.5 7 ohms 15 watts
A: The T-125 is a tweeter. Your speaker requires a full range driver. We do not sell anything in that size for your application.
Q: Will these tweeters work on Bose Model 21? Is the 2" just the diameter of the speaker or the entire assembly? Thanks! Don
A: Specs as shown on product page: Size: 2.375" (3" diagonally)
Hole cut-out: 2"
These will work for the Bose replacements as long as the sizing matches.
Q: Hello, will this tweeter work in my MCS 8330? Believe it is a JC Penny branded speaker made by Technics back in the 80's.
We have never installed the T-125 into your model. We need more info. Please email [email protected]
with a photo and dimensions from the original tweeter. Thanks!
Q: What crossover network is required?
A: Any of our 2 way or 3 way crossovers will work with this tweeter. You can also use a 4.7uF capacitor in series with the unit or use the original crossover in your speaker cabinet.
Q: Description mentions compatibility with Technics. Will these work on SB-CR77's?
A: No, but our slightly larger T-120 works in the SB-CR77, tweeter # EAS65PH313A6. Please note, you must re-use the original plastic trim with the new tweeters.