Place an Order? Toll Free: 1-800-511-3343
Shopping Cart -
0 item(s)
Search by
Hello Guest, Login

Standard 10" Foam Speaker Repair Kit FSK-10A-4 (4 PACK)

Part Number:FSK-10A-4
Standard 10" Foam Speaker Repair Kit FSK-10A-4 (4 PACK)
Speaker Repair Kit # FSK-10A-4
Standard 10" Foam Speaker Repair Kit FSK-10A (4 PACK)
Your Price:$39.95
List Price:$59.95
You Save:$20.00


In Stock

Choose Options

Add Liquid Foam Guard? help
10" Speaker Foam Repair New-Edge-It ® Kit, Part # FSK-10A-4 (4 PACK)

Speaker Foam Edge Repair Kit
Outer diameter:
9-3/4" (248mm)
Roll outer diameter:
8-15/16" (227mm)
Cone diameter:
7-5/8" (194mm)
Inner diameter:
7" (178mm)
Foam roll width:
5/8" (16mm)
Variances up to 1/8" (3mm) from your speaker measurements are OK.
  • 10" angle attach woofer foam repair kit. New-Edge-It ® 4 Pack part # FSK-10A-4
  • Fits most 10" frame speakers with 7-5/8" cone

    Please check the model and size of your speakers before ordering to be sure you receive the correct foam edge repair kit.

  • Speaker New-Edge-It ® foam repair kits include:
  • Four new formula polyether foam rubber surrounds. These last much longer than the original foam.
  • Special CLEAR speaker repair adhesive part # MI-3035. The same adhesive we use for our repairs.
  • We do NOT use generic glue or Elmers type white glue like others sell.
  • Easy to follow illustrated instructions. Installation average time is 30 minutes per speaker.
  • You do not need to remove the dust caps to install these kits perfectly - every time.
  • See online installation instructions here: Speaker Refoam Instructions
  • FREE technical support. FREE shipping to any USA address.
  • Join over 150,000 customers that have used our New-Edge-It ® speaker foam repair kits successfully!
4 Stars
Good product
Installed surround on Woofers and passive Woofers. Worked perfectly. Had to shim the VC though to prevent rubbing.
Did you find this helpful?  1 of 1 Found Helpful
Reviewed by:  from Newark, OH. on 5/19/2017
5 Stars
My speakers sound like new again. Repaired four 10" woofers in my 30 year old speakers using the Simply Speakers surrounds and adhesive and foam guard. It was a family project for my wife and I. We followed the instruction videos and a bit of on-line guidance from Simply Speakers. Three out of four worked out fine the first time. The fourth, however, required a deeper repair - removing the dust cap, reshimming the voice coil, and reassembling in the precise position to avoid rubbing of the voice coil on the magnet. We felt confident in our approach based on the excellent video instructions and helpful emails and offers of support from Simply Speakers. Additional information: The adhesive that comes with the surrounds maintains an elasticity after curing. It goes on like a liquidy gel and allows a short time to work with it to position the parts to ensure proper placement and then quickly gets tacky and holds strongly. The adhesive is clear and dries clear. The foam guard (applied only on the outer surface of the surround) goes on white but dries clear (comes with a brush). If with the old surround removed, you can hear a bit of rubbing when the cone is moved up and down, then you may wish to partially remove the dust cap, add shims (I used thin plastic pieces cut from an old transparency) to position the cone just right before reassembling. Because the adhesive has some elasticity, we were able to carefully lift away the surround from the cone and then re-use it after we had it shimmed in the correct position (on the one we had to re-do). We would heartily recommend the Simply Speakers products and we commend the company on their great on-line helpful instructions and for their customer support provided directly to us. Well done.
Did you find this helpful?  1 of 1 Found Helpful
Reviewed by:  from Ontario Canada. on 1/25/2016
5 Stars
speaker repair
If in doubt of your ability, a video is offered to instruct you. Extremely easy repair, don't get in a hurry!
Did you find this helpful? 
Reviewed by:  from Cottonwood Falls. on 12/6/2016
5 Stars
The foam repair kit was perfect! All four 10" woofers required new foam surrounds in a pair of RTR D300 speakers (from 1979). There was more than enough adhesive included to do the job. And while the included repair instructions were effective, Simply's instructional YouTube video completely demonstrated the repair task from beginning to end. The repair took a lot less time than I thought it would, and most importantly, these vintage tower speakers have been restored to new or better-than-new condition with your high quality foam surrounds. A "reconditioned: sticker on each speaker basket indicated these woofers had been serviced before by the original owner (who gave them to me). He will be delighted to hear his old stereo system in action once again. I will definitely recommend your offerings to my friends and will absolutely order parts again from!
Did you find this helpful? 
Reviewed by:  from Hammond, LA. on 10/11/2016
5 Stars
The speaker repair kit was easy to use and it saved my vintage speaker system! Fabulous product! Thanks
Did you find this helpful? 
Reviewed by:  from Idaho. on 8/25/2016



Related Items

Ivory Speaker Grill Cloth 60
Average Rating(11)
In Stock
Jet Black Speaker Grill Cloth 60
Average Rating(139)
In Stock
  • Speaker Repair Videos
  • SS Apparel
  • Diaphragms & Parts
  • New-Edge-It Foam Kits
  • Pro Cloth Edge Kits
  • Rubber Edge Kits
  • Ferro Fluid Kits
  • Speaker Repair Parts
  • Advent - AR - NHT Parts
  • Genuine Eminence Parts
  • JBL Factory Parts
  • ESS Factory Parts
  • EV Factory Parts
  • Peavey Factory Parts
  • Replacement Speakers
  • Tweeters
  • Midranges
  • Woofers
  • Full Range
  • Speaker Grill Cloth
  • Speaker Grills
  • SS Audio Recone Kits
  • Speaker Adhesives
  • Speaker Dust Caps
  • Speaker Gaskets
  • Online Instructions
  • Speaker Accessories
  • Crossovers
  • Specials
  • Scratch and Dent - Open Box
  • Customer Photos & Videos*
  • Speaker Repair Photos
  • Special Order Parts
  • Top Sellers
    New Releases